Install 2 additional banner posts as previously installed. Located in: Kent
Dug out surrounding area to various existing bollards.
Straightened, levelled and secured bollards with postcrete.
Backfilled exposed areas where required.
Areas left tidy and secure.
Located in Kent.
Failed reflective tape removed and surfaces prepared. Hi-Vis reflective tape supplied and applied to approximately 225No. bollards at a retail park in St Albans.
New anti-ram bollard fitted and local paving slabs replaced. Following impact damage to a light column, we attended initially to make safe and barrier off the local area. Re-attended to straighten and secure. Works carried out in Heathrow.
Upon inspection, both bollard lights were non functional due to water damage and 1of2 had been impact damaged. Internal components removed and rewired to suit LED lamps. Both bollard lights fitted with new LED lamps. 1of2 straightened and local area made good with tarmacadam. Both redecorate and left with temporary 'Wet Paint' tape in place. Works carried out an industrial estate in London.
Following reports of a leak into the basement below, we came across an aged coal chute. Upon inspection, we noted clear sealant had been applied numerous time and glass infills replaced with timber, by others. The coat chute itself dated back to the 18th or 19th century, we agreed with the client it had reached its end of life and recommended replacing. Having agreed costs and acquired council permits, the pavement light was replaced entirely and left to cure. Works carried out in Soho, London.
Following reports of vehicles driving over the kerb island at a retail park in Crawley, we attended initially to make safe with barriers. Re-attended shortly after to supply and fit 1No new heavy-duty yellow bollard. Also, relaying local existing paviours with a small amount of closely matching new.
Following numerous reports of impact damage to light columns throughout a vast industrial estate in West London. We supplied and fitted 64No protective bollards. All bollards are powder coated to closely match the sites colour theme and branding. Upon completion, all newly fitted bollards were touched up and cleaned down.
